Glossary · Industry vocabulary

Broken period interest (BPI)

Broken period interest (BPI) is the interest charged for the odd days between the date a loan is actually disbursed and the start of its first full instalment period. It runs at the loan's own rate, for those days only.

  1. Loan disbursed
  2. Odd days before the first full period
  3. Interest at the loan's rate
Illustrative example

A ₹4,00,000 loan at 12% a year over 24 months is sanctioned on 10 January 2026 and disbursed on 18 January. EMIs fall on the 5th, so the first full period runs from 5 February to 5 March and the first EMI of ₹18,829.39 is due on 5 March. The broken period is 18 January to 5 February: 18 days. Under Actual/365, you'll get BPI of 4,00,000 × 12% × 18 ÷ 365 = ₹2,367.12. Deducted at disbursal, the borrower receives 4,00,000 minus 2,367.12 = ₹3,97,632.88. Added to the first instalment, the 5 March payment becomes 18,829.39 + 2,367.12 = ₹21,196.51. The two errors RBI named change the figure. Counting from the sanction date gives 26 days and ₹3,419.18, which is ₹1,052.06 too much. Charging the whole month gives 4,00,000 × 12% ÷ 12 = ₹4,000, or ₹1,632.88 too much. We've made the loan up to show the sums. It isn't a real account.

You want every EMI on one fixed day of the month, say the 5th. Loans rarely get disbursed on the 5th. The borrower has your money in the meantime, so those in-between days carry interest. That short stretch before the first full period is the broken period, and the interest on it is BPI. The same odd-days question comes up on a bullet loan that collects interest monthly, and an advance EMI loan avoids it only when the disbursal date and the EMI date coincide.

The start date is what RBI cares about. Its circular on charging of interest dated 29 April 2024 (RBI/2024-25/30, now carried for NBFCs in RBI's Miscellaneous Supervisory Directions for NBFCs, 2026, RBI/DoS/2026-27/467 of 31 July 2026, paragraphs 7-9) listed practices its onsite examinations had turned up: interest from the date of sanction or of the loan agreement instead of the date funds actually reached the borrower, interest from a cheque's date when the cheque was handed over days later, and a full month's interest on a loan disbursed or repaid mid-month. Where supervisors found these, they'd already advised lenders to refund the excess. The circular directed every lender to review its practices and take corrective action, system changes included. Each of those errors lives in the broken period, so that's the stretch of your schedule to check first.

Disclosure is the other half. Under RBI's Key Facts Statement rules (circular RBI/2024-25/18 of 15 April 2024, now in the NBFC Responsible Business Conduct Directions), the KFS for a retail or MSME term loan carries the APR and the amortisation schedule. The APR takes in every charge you levy. A charge the KFS leaves out can't be collected later without the borrower's explicit consent.

BPI reaches your borrower in one of two ways. You can deduct it at disbursal, so the borrower gets the loan amount minus the BPI and the schedule starts clean. Or you can add it to the first instalment, which makes the first EMI on the statement bigger than every one after it. Either way, you'd show the broken period on the schedule as its own line, with its dates and day count. On the statement, show the BPI as interest, apart from the EMI, so a borrower comparing the two can see where the extra came from.

The work doesn't stop at disbursal. Accrual has to run from the date the money reached the borrower, not the date your disbursal batch was approved. If a payout bounces back and you send it again, the start date moves. So does the BPI. If the first EMI fails, the BPI rides into arrears with it, and days past due counts from that instalment's due date like any other. If your borrower forecloses inside the first month, they'll need a payoff figure that covers interest from disbursal to the payoff date. In Lokta's loan management system, broken-period treatment is a product setting next to the day-count convention, so the schedule and the daily accrual read the same rule. The interest accrual guide goes further into day counts and backdated events.

Frequently asked questions

What is the formula for broken period interest?

You multiply the amount disbursed by the annual interest rate, then by the number of days in the broken period, and divide by the days in the year under the product's day-count convention (365 under Actual/365). Count from the date the funds reached your borrower's account to the start of the first full instalment period, never from the sanction date.

Why is my first EMI higher than the rest?

It's usually because your lender added broken period interest to it. The loan was disbursed partway through a cycle, and the interest for those odd days was collected with the first instalment instead of being deducted from the amount you received. The repayment schedule in your Key Facts Statement should show the larger first instalment and the days it covers.

Is broken period interest allowed under RBI rules?

RBI's April 2024 circular on charging of interest doesn't mention BPI by name. What it objected to was the wrong start date or the wrong length: interest from the sanction or agreement date, from a cheque's date before the cheque was handed over, or for a whole month when the loan ran for only part of one. Interest counted from actual disbursal avoids all three.

Does broken period interest have to appear in the KFS?

RBI's KFS template has no row labelled broken period interest. What the rules do say is that the KFS carries the APR, which takes in every charge the lender levies, and the amortisation schedule, and that a charge the KFS doesn't mention can't be collected later without the borrower's explicit consent. BPI should therefore be reflected in the APR and the schedule.

Last updated

Founder-led adoption

Adopt the agentic loan servicing platform.

Lokta is built for enterprise deployment, VPC or single-tenant cloud, with an audit trail in every state change. We work with a select group of institutions through a founder-led model: deep adoption, deliberate scope, a delivery window the team commits to in writing.